[click image for larger view]

14-1/2 “ swing over bed ways, 12-3/8” swing over carriage, 6” swing over cross slide.
Machine can use Gang type tooling or quick change tooling with tailstock.
Positioning: +/- 0.000080”, repeatability: +/- 0.000040”, spindle run out 0.000050” TIR.
Programmable spindle speeds up to 4,000 rpm.
Constant Surface Speed.
Alloy steel used on full bed-width bearing surface with dovetail design.
Over size cross slide for extra rigidity.
Oversized preloaded ball screw supported at both ends by angular contact bearings.
AC servo motors for X and Z axis travel.
Anilam Model 4200T 2 axes CNC control.
Full CNC operation and complete manual operation.
Manual operation offers 1 hand wheel 2 axes simultaneous movement for cutting taper.
Make first part manually, subsequent parts automatically (teach-in function).
G-code or conversational programming.
2 front mounted electronic hand wheels (MPG).
Pneumatic power 5C collet closer (standard).
Automatic lube system with low level alarm.
CNC threading with multiple leads capability.
5 HP spindle motor.

> top


SPECIFICATIONS:

	1118H CNC PLUS
CAPACITY
Swing over bed	14.5"
Swing over carriage	12.37”
Swing over cross slide	6”
Tool Height	1/2"
Tooling Plate Size	7.5" x 12" (7.5"x15" opt.)
Maximum X-Axis Travel	9" (12" opt.)
Maximum Z-Axis Travel	5" (8" opt.)
Feed Rate	200 ipm
Rapid Traverse	500 ipm
Carriage Base Movement (Manual)	13.4"
Drive System (X & Z Axis)	AC Servo Drive
Linear Guideway System	25mm by NSK
Ballscrews	20 mm (3/4"), C3 Precision Ground
SPINDLE
Spindle Speed Range (Programmable)	100-4,000 rpm
Spindle Through Hole	1-1/16"
Spindle Collet, Chuck	5C, (6" chuck opt.)
Spindle Motor	5HP
Accuracy
Positioning	+/- 0.00008"
Repeatability	+/- 0.00004"
Spindle TIR	0.00005"
CNC CONTROL
Anilam Model 4200T	PC based, with 12.1" TFT active matrix screen, 8GB hard-disk, 8MB ram, 3.5" floppy drive, Conversational or G-code programming.
GENERAL
Electricity	220v, 60hz, 3 phase (440v opt.)
Coolant Pump Motor	0.25 HP
Net Weight (approx)	2,700 lbs

STANDARD ACCESSORIES:
Anilam 4200T CNC controller
Handheld Manual Pulse Generator
2 axis AC servo drive system
Auto lube system with low level indicator
Coolant system with flexible nozzle
Pneumatic 5C collet closure
Back-mounted splash guard
Front-mounted chip guard
Halogen light
1/2” high tooling
7.5” x 12” tooling plate
Tailstock
220V/60/3phase or single phase


OPTIONAL ACCESSORIES:
6” chuck with back plate
440V/3/60
CNC control options

> top

 Specifications

 Accessories

 Dimensions

 Get a quote

 View more Lathes