Tool Room Lathe, Sharp Industries - Quality Precision Tool Room Lathes

A high precision tool room lathe with spindle accuracy up to 50 millionth of an inch, equipped with Digital Variable Speed Spindle Drive, built on alloy steel bedways, ideal for any high precision, small parts operation.

FEATURES:

[click image for larger view]

Digital Variable Speed (DVS) - Super quiet and vibration free.
High-speed spindle (infinitely variable 130-4,000 rpm), accuracy within 50 millionths TIR.
Hardened and ground spindle.
Precision alloy steel bed ways.
Preset DVS hi-low ratio.
Independent electric feed control on carriage and cross slide using high quality DC motor by Bodine. It also allows directional and precise feed rate adjustment.
Quick-change inch/metric gearbox with 36 changes.
Double angular contact bearings support spindle.
Quick-action compound slide for threading. Inch/metric dials.
Adjustable thread length control stops with fine adjustment.
Hardened and ground leadscrews.
Inch / metric dual dial.

> top

SPECIFICATIONS:

	1118H
CAPACITY
Swing over bed	11"
Swing over carriage	9"
Swing over cross slide	6"
Distance between centers	18"
SPINDLE
With round 5C collets	1 1/16"
With hexagon 5C collets	7/8"
With square 5C collets	3/4"
With expanding chucks	3"
With step chucks	1 1/16-6"
With jaw chucks 5"
Spindle speed range (infinitely variable DVS)	130-4,000 rpm
Spindle nose taper (inside)	5C (10º)
Spindle nose taper (outside)	4º
TRAVEL AND FEED RANGE
Cross slide travel	6"
Compound slide travel	3"
Quick-action compound slide travel	0.1"
Carriage power feed range	5/16-7"
Cross slide power feed range	4/16-4"
THEADING
Leadscrew pitch, diameter	8 tpi, 1"
Inch threads (36)	11-108
Metric threads (36)	0.275 - 2.7
TAILSTOCK
Tailstock spindle diameter	1.358"
Tailstock spindle taper	MT #2
Tailstock spindle travel	3.75"
GENERAL
Main motor	5 HP, 3 phase or single phase
Coolant pump motor	0.25 hp
Feed motor (DC)	75 watt, 110 volt
Weight (approx)	2,300 lbs

STANDARD ACCESSORIES:
Coolant system
Splash Guard
5C collet closer
5C collet holder trays
Halogen light
Chuck guard
Drive plate
Spindle nose cover
Tailstock
Drive dog
Drive gear
Adjustable tool setting gauges
Tool kit

OPTIONAL ACCESSORIES:
7" Face Plate
Quick change tool holder set (KDK)
Vertical cut-off slide
Taper attachment
Steady rest
Follow rest
3-Jaw 6" chuck with 6" fixture plate
4-Jaw 6" chuck with 6" fixture plate
Live center-Royal dual bearing
Live center MT#2
Drill chuck - Jacobs with arbor
440V capability (440V-220V step-down transformer)

> top