Geared Head Precision Lathes by Sharp Industries

Small but sturdy geared head precision lathes, the V models are equipped with Digital Variable Speed Sp spindle for easy speed change.

FEATURES:

[click image for larger view]

Hardened and ground gears in headstock for long lasting wear.
Induction hardened and ground bed ways for smooth longitudinal movements.
Spindle supported by 2 high precision tapered roller bearings.
Carriage equipped with overload clutch to protect gears and screws.
Quick change totally enclosed gearbox offers wide range of threads.
Oil bath lube system keeps gears and shafts well lubricated.
Oversized compound, apron and cross slide offer better cutting stability compare with similar size models available in F and V models.
Jog button for easy engagement of gears and inching of spindle rotation.
Digital Variable Speed in VS and V models allow easy change of spindle speed by dialing, it also operates on 3 phase or single phase power supply.
Gapped bed allow large work piece to be chucked when needed.

> top

SPECIFICATIONS:

	1340VS	1440F/ 1440V
CAPACITY
Swing over bed	13"	14"
Swing over cross slide	8 5/16"	8 5/8"
Swing over gap	18-1/2"	20"
Width of bed	7 1/2"	8 1/2 "
Distance between centers	40"	40"
HEADSTOCK
Spindle nose type	D1-4 cam lock	D1-4 cam lock
Spindle bore	1-9/16"	1 1/2"
Spindle speeds	40 - 2,000 rpm [vari]	45 - 1,800 rpm [16] / 30-2200 rpm [variable]
Taper of spindle bore	MT #5	MT #5
THREADS AND FEEDS
longitudinal feeds - in / rev [40]	0.0016 - 0.046"	0.0012 - 0.029"
Cross feed - in /rev [40]	0.0005 - 0.015"	0.0003 - 0.01"
Inch threads [TPI]	2 - 56 (39)	4 - 112 (40)
Metric threads [mm]	0.5 – 12(42)	0.45 - 7.5mm
Lead screw (pitch, diameter)	8 tpi, 1"	8 tpi, 7/8"
CARRIAGE
Saddle width	12"	13-1/4"
Apron width	11"	11"
Cross slide width	4.5"	6-3/4"
Cross slide travel	6 3/4"	7"
Compound rest travel	3 1/2"	4"
Compound width x length	3 x 7-1/2"	3-1/2 x 8-1/2"
BED
Bed length	64"	66"
Bed width	7 1/2"	8 1/2"
TAILSTOCK
Quill travel (graduated)	4 "	4 1/2"
Quill diameter	1 9/16	1 3/4"
Quill taper	MT #3	MT #3
GENERAL
Spindle motor	3 HP	3 HP
Motor electric phase	single or 3 phase	3 phase/single or 3 phase
Net weight (approx.)	1,550 LBS	1,650 LBS

STANDARD ACCESSORIES:
Removable gap
Steady rest
Coolant system
Full length splash guard
4 way tool post
Tailstock
Back plate
Foot brake
Thread dial
Center sleeves
Dead centers
Tool kit

OPTIONAL ACCESSORIES:
3 jaw chuck
4 jaw chuck
Chuck guard
Follow rest
Taper attachment
Quick change tool holder
Liver Center
Drill chuck
Face plate
Micrometer carriage stop
5C collet closure
2 axes digital readout system
440V transformer

> top