[click image for larger view]

Model 3000M-3X 3 axis (table, saddle and quill) CNC system by Anilam.

AC Digital Servo drive systems for X ,Y and Z axes travel.

Able to perform 3-D countour work.

Runs on G-code or conversational programming format.

Precision-ground ballscrews with preloaded ball nut assemblies.

3 axis (table, saddle, quill) digital readout system.

Quill drive assembly with disconnect allows the operator to switch between 2-axis and 3-axis machining on the fly.

ANILAM 3000M SYSTEM FEATURES

HARDWARE

12.1” TFT Flat screen console

Pentium 266 processor

RS-232 port

3-1/2" floppy disk drive

8 GB hard disc

DSP-2 enhanced motion control system that provides significant increases in productivity by producing high speed machining

SOFTWARE

General operation: automatic/manual/single step mode, feed rate display, tool number/diameter/length offset display, position display, loop counter and dwell time display, various resolutions display, item and parts counter display, automatic and programmable homing, parameter setup, DNC, teach-in mode.

Programming: Input via MDI, RS-232 and floppy disk, networking, inch/metric conversion, absolute/incremental programming, conversational programming, blueprint programming, polar/coordinates programming, help graphics, rotation, mirroring, scaling, triangle calculator, geometry calculator, G-code to conversational converter.

Graphics: automatic fit, window zoom, real time draw graphics, pan zoom, tool display, simulate a section of or the entire program.

Compensations: diameter/radius, length offsets, offset calibration, lead screw compensation, backlash compensation, linear compensation.

Canned cycles: ellipse, frame pocket milling, hole milling, circular pocket, rectangular pocket, full bolt hole pattern, partial bolt hole pattern, basic drilling, irregular pocket with islands, rectangular hole, rectangular profile, face milling circular profile.

Able to import and run G-code files from CAD/CAM programs to machine full 3-D contoured parts.

Automatically control spindle’s speed and/or direction of the machine (machine has to be equipped with the DVS head-an optional item, plus the programmable speed option).

For detail information on Anilam 3000M CNC control system, please go to the following web site www.anilam.com

> top


SPECIFICATIONS:

	LMV/ALM-3	LMV-50/ALM-3	TMV/ALM-3
Table
Working surface	9”x 42”	9”x 50”	10”x 50”
T-slot number, size	3, 5/8”	3, 5/8”	3, 5/8”
Capacity
Table travel	11”x 25”	11”x 32”	15.5” x31”
Ram travel	12”	12”	18.5”
Quill travel; z-axis	5”	5”	5”
Knee travel	16”	16”	15.3”
Spindle to column	6-3/4"- 18-1/2"	6-3/4"- 18-1/2"	9.8”-28.3”
Spindle to nose to table	2-1/8”-18”	2-1/8”-18”	1-1/2”-17”
Spindle
Motor	3 HP	3 HP	3 HP
Wiring voltage	220/440V, 3 phase, 60 H	220/440V, 3 phase, 60 H	220/440V, 3 phase, 60 H
Taper	R-8	R-8	R-8
Speed (vari speed)	60-4,500 RPM	60-4,500 RPM	60-4,500 RPM
Quill feed (IPR)	0.0015, 0.003, 0.006”	0.0015, 0.003, 0.006”	0.0015, 0.003, 0.006”
Head swivel	360°
Head tilt; left-to-right
Head tilt; up-and-down	45°
Dimensions and Weight
Floor area	87x64x84	101x64x84	101x74x87
Net weight (lbs)	3200	3250	3650

STANDARD ACCESSORIES:
Hard-chrome ways (LMV, LMV-50)
Hardened and ground box ways (TMV)
Front and rear way covers
Automatic lube system
Tool Kit


OPTIONAL ACCESSORIES:
DVS Head wired 220V
440V Transformer - 3HP
6” “Kurt” Vise with Swivel Base
R-8 collet set.
Clamping kit.
Right angle milling attachment.
Riser block.
Power drawbar.
Coolant System with Chip Pan At Base
Power Draw Bar
Halogen Work light

> top

 Specifications

 Accessories

 Dimensions

 Get a quote

 View more Mills