Lathe, Mills, Grinders by Sharp Industries - Quality Precision Machine Tools

A PC-based controlled 2 axis (table and saddle) CNC vertical knee mill. The MILPWR System by Acu-Rite has a highly user-friendly conversational programming format that is powerful enough to handle any job and easy enough for anyone to operate. The system can be used as a full function digital readout, as a programmable CNC control, or both.

FEATURES:

[click image for larger view]

MILLPWR 2 axis CNC system by Acu-Rite.

Digital Servo drive systems for X and Y axes travel.

Precision-ground ballscrews with preloaded ball nut assemblies.

3 axis (table, saddle, quill) digital readout system.

Automatic lubrication system.

Safety hand wheels.

Machine features same as Models LMV, LMV-50, TMV, TMV-1.

MILLPWR CNC SYSTEM FEATURES

HARDWARE

10” flat-panel LCD display operator console

3-D, color keypad

RS-232 port

3-1/2" floppy disk drive

Emergency table stop button

Remote stop-go switch

SOFTWARE

User friendly conversational programming format. No prior programming experience is necessary.

Standardized menus make it easy to program common features like lines, arcs, pockets, bolthole patterns, islands, spirals and ellipses. To add a feature to the program, simply press a function key and then follow the prompts.

Perform complex calculations to solve geometry and trigonometry problems.

Edit individual steps or merge whole or partial programs already created by using functions such as: Mirror/repeat/rotate, Explode, Reverse step, Reverse path, Change steps, Delete steps, Copy/move steps.

Import geometry directly from a CAD file using the MILLPWR’s DXF file input-for faster programming and fewer errors.

Preview each step with immediate-part-view graphics – the console automatically shows a graphic representation of each step once it is created in a program.

For detail information on Acu-Rite Millpwr CNC control system, please go to the following web site www.acu-rite.com

Digital Variable Speed Head (DVS) available:

Why DVS head?
High reliability with fewer moving parts than regular vari speed head Dynamic brake Low voltage control Large Digital rpm display Fully enclosed display unit Dependable Inverter Drive System Machine can run on single phase or 3 phase electricity Safety device prevents machine from self starting after power failure or after emergency stop being pushed

> top

SPECIFICATIONS:

	LMV/MP	LMV-50/MP	TMV/MP	TMV-1/MP
Table
Working surface	9”x 42”	9”x 50”	10”x 50”	10”x 50”
T-slot number, size	3, 5/8”	3, 5/8”	3, 5/8”	3, 5/8”
Capacity
Table travel	11”x 25”	11”x 32”	15.5” x31”	15.5”x 34”
Ram travel	12”	12”	18.5”	19”
Quill travel; z-axis	5”	5”	5”	5”
Knee travel	16”	16”	15.3”	15.3”
Spindle to column	6-3/4"- 18-1/2"	6-3/4"- 18-1/2"	9.8”-28.3”	9.8”-28.3”
Spindle to nose to table	2- 1/8”-18”	2- 1/8”-18”	1-1/2”-17”	1-1/2”-17”
Spindle
Motor	3 HP	3 HP	3 HP	5 HP
Wiring voltage	220/440V, 3 phase, 60 H	220/440V, 3 phase, 60 H	220/440V, 3 phase, 60 H	220/440V, 3 phase, 60 H
Taper	R-8	R-8	R-8	#40
Speed (vari speed)	60-4,500 RPM	60-4,500 RPM	60-4,500 RPM	60-4,500 RPM
Quill feed (IPR)	0.0015, 0.003, 0.006”	0.0015, 0.003, 0.006”	0.0015, 0.003, 0.006”	0.0015, 0.003, 0.006”
Head swivel	360°	360°	360°	360°
Head tilt; left-to-right	45°	45°	45°	45°
Head tilt; up-and-down	45°	45°	45°	45°
Dimensions and Weight
Floor area	87x64x84	101x64x84	101x74x87	106x72x89
Net weight (lbs)	3200	3250	3650	3750

STANDARD ACCESSORIES:
Hard-chrome ways (LMV, LMV-50)
Hardened and ground box ways (TMV, TMV-1)
Front and rear way covers
Automatic lube system
Tool Kit

OPTIONAL ACCESSORIES:
DVS Head wired 220V
440V Transformer - 3HP
6” “Kurt” Vise with Swivel Base
R-8 collet set.
Clamping kit.
Right angle milling attachment.
Riser block. Power drawbar.
Coolant System with Chip Pan At Base
Power Draw Bar
Halogen Work light

> top