Lathe, Mills, Grinders by Sharp Industries - Quality Precision Machine Tools

A versatile model with “two machines in one” design, offering Vertical and Horizontal milling operations in one set-up. Changer over from one operation to the other is quick and simple. All it takes is the swing over of the overarm and repositioning of the locating pins.

FEATURES:

[click image for larger view]

Separate motors drive the vertical spindle and the horizontal spindle.

4 H.P. Variable Speed Drive on the vertical with #40 taper spindle.

5 H.P. Gear Head Drive on the Horizontal with #40 taper spindle.

10”x 56" Table, 16-1/2" x 36" Travel.

The Vertical Milling Head can tilt 4 ways for better milling versatility.

Built-in Gar box power feed of the table that offers 12 different feed rates and rapid traverse for easy positioning.

Double Box Ways on Knee, Hardened & Ground for maximum rigidity at the movement of the table.

Turcite coated Saddle Ways, to retain lube oil and resist long lasting wear.

Box Type Column Ways, Hardened and Ground for maximum rigidity.

Knee movement is equipped with rapid traverse feature for easy elevation of heavy work piece.

Swing arm type pendant control allow easy access to all control knobs and switches.

Meehanite castings are used for superior vibration dampening characteristics.

> top

SPECIFICATIONS:

	VH-25
TABLE
Working surface	10” x 56”
Longitudinal travel, cross travel	36”, 16-1/2”
Longitudinal feeds (12)	7/8-27 ipm
Longitudinal rapid traverse	82-1/2 ipm
Vertical knee travel, ram travel	17-1/2”, 18-1/2”
MILLING HEAD
Spindle motor (vertical)	4 HP
Spindle motor (horizontal)	5 HP
Vertical spindle speeds (inf. Var.)	60-4,500 RPM
Spindle speeds (horizontal) (6)	80,120,230,380,700,1350 RPM
Spindle taper , vertical	NST #40
Spindle taper, horizontal	NST #40
Power quill feeds (3)	0.0016, 0.003, 0.006 ipm
Quill travel	5”
Quill diameter	3-1/2”
Turret swivel	360º
Head tilt, front and back	45º
Head tilt left and right	90º
Spindle center to column (min-max)	12-13/16” – 30-11/16”
Spindle nose to table (min-max)	5-5/16” – 23”
HORIZONTAL SPINDLE
Spindle center to table (min-max)	0 – 17-3/8”
Spindle center to bottom of overarm	5-1/2”
Spindle to nose column	15/16”
GENERAL
Wiring voltage	220V/3/60
Net weight	4,200 LBS
Machine dimensions (L x W x H)	82” x 75” x 93”

STANDARD ACCESSORIES:
Flood coolant
Longitudinal table powerfeed with rapid traverse
Splash pan
Rapid knee traverse
Rubber way cover-rear
1" Diameter, horizontal arbor with (2) arbor supports
Toolbox

OPTIONAL ACCESSORIES:
Power draw bar
Power cross feed
Digital readout system

> top