• Summary
  • Features
  • Specs
  • Accessories
  • Parts
  • Brochure
  • Quote
RD-2000

Sharp radial drills are excellent machines for tapping, drilling and boring large holes on cast iron or steel material. The traveling arm is made with hardened and ground slide ways for precise movement of head and spindle. The vertical column utilizes double tube design for rigidity. The spindle is equipped with depth setting.    

  • The Sharp heavy duty Radial Drilling Machines are designed for a wide range of machining operations to be used under the most demanding conditions. 

 

  • All major castings are made of closed grained full ribbed iron to give maximum stability under stress. The headstock gears are made of hardened and ground nickel-chrome alloy steel. 

 

  • The arm is mounted with ground slideways and operated by electric control. It has a safety device that will prevent the arm from dropping due to unforseen reasons. 

 

  • The rigidly ribbed casting base is provided with T-slots and drain channels. The spindle is designed for maximum speed, feed rate and depth. 
RADIAL DRILLS RD-820 RD-1230 RD-1600 RD-2000 RD-2500
Diameter of Column 8.25" 11.81" 17" 21.65"
Distance from column surface to spindle center, Max 31.5" 48.5" 63" 78.74" 98.42"
Distance from column surface to spindle center, Min 8.63" 13.37" 16.93" 19.68"
Travel of Spindle Head 24.87" 35" 49.62" 61.81" 78.74"
Distance from base surface to spindle center, Max 47.63" 54" 63" 72.83" 78.74"
Distance from base surface to spindle center, Min 13.75" 19.38" 13" 15.34" 21.65"
Elevating Height of Arm 25.56" 34.62" 35.44" 43.31" 39.37"
Taper hole in spindle #4 MT #5 MT #6 MT
Stroke of spindle 8.25 9.87 14.57 17.72
RPM of Spindle (range x steps) 88-1500 x 6 steps 44-1500 x 12 steps 40-1920 x 12 steps 16-1250 x 16 steps
Main Motor (HP) 3 HP 5 HP 7.5 HP 10 HP
Clamping Motor for column and gear box Manual Clamp 1 HP Hydraulic
Clamping Motor for arm Manual Clamp 1 HP 1/2 HP Hydraulic
Coolant Pump (HP) 1/8 HP 1/4 HP
GENERAL
Measurement (LxWxH) 66" x 32" x 86" 80" x 39" x 89" 114" x 56" x 115" 130" x 59" x 123.6" 157" x 63" x 151"

STANDARD ACCESSORIES:

  • Box table
  • Coolant system
  • Work light
  • Toolbox

OPTIONAL ACCESSORIES:

  • Tilting table

Please contact our parts department at 310-370-5990.

Get a Quote

By submitting this form, you accept the Mollom privacy policy.

*Prices may vary based on location