• Summary
  • Features
  • Specs
  • Accessories
  • Parts
  • Brochure
  • Quote

Box type inner-ribbed structure,
Hardened and ground leadscrew,
Auto lube system, Direct drive spindle

  • One "V" and one flat way for longitudinal travel; both ways are hand-scraped and covered with Turcite B coating.
  • Lead screws are hardened and ground for durability.
  • Accurate slot grinding achieved using saddle locking system.
  • Double-nut backlash eliminator.
  • Cross slide and column screws are hardened and ground to a 70 Rockwell C hardness.
  • Hardened and ground box ways on column and saddle.
  • Smooth wire rope-driven table.
  • Main spindle run out within 0. 0001".
  • Automatic lubrication system.
Maximum grinding length 18.5"
Maximum grinding width 6.3"
Max distance: table to spindle center 16"
Working surface (W x L) 6 x 18.3"
Maximum longitudinal travel 18.9"
Maximum cross travel 7"
Hand feed per revolution (longitudinal) 2.7 in/rev
Hand feed per revolution (cross) 0.2 in/rev
Graduation of hand wheel 0.0008"
Hand feed per revolution (vertical) 0.04 in/rev
Graduation of hand wheel 0.0001"
Spindle motor 1 1/2 HP
Spindle speed 3,600 rpm
Grinding wheel outside diameter 8"
Grinding wheel bore 1.25"
Grinding wheel width 0.63"
Floor space (W x H x L) 83 x 40 x 48"
Net weight (approximately) 1,500 lbs

Standard Accessories

  • Grinding Wheel (8”x 1.25”x 0.63”) 
  • Wheel adaptor 
  • Work light 
  • Balancing arbor 
  • Diamond dresser 
  • Tool kit 

Optional Accessories

  • 6”x18” permanent magnetic chuck
  • 6”x18” electro magnetic chuck
  • 6”x18” fine pole electro magnetic chuck
  • Parallel dresser
  • Balance stand
  • Extra wheel adapter/flange
  • Coolant system (12 gal) with splashguard
  • Dust collector
  • Coolant system (25 gal.) with paper filter and magnetic separator 
  • Digital Readout System

Please contact our parts department at 310-370-5990.

Get a Quote

*Prices may vary based on location