• Summary
  • Features
  • Specs
  • Accessories
  • Parts
  • Brochure
  • Quote
Box Way Vertical Machining Centers

The Sharp SV-2414 series of compact vertical machining centers are engineered to have unsurpassed quality and outperform all other machines in its category. All of our vertical machining center structural components are made of Meehanite castings with internal ribs running throughout each section. Each axis is driven by a high precision double-nut ball screw that is centered between the guide ways. All structural mating surfaces are precision hand scraped to increase the flatness and to improve geometric accuracy.


  • 24” x 14” x 18” travel
  • Box way construction
  • 10,000 rpm, CAT 40 spindle
  • 10 tools carousel type ATC (16 tools optional)
  • Fanuc Oi-MD control
  • Small footprint
Box Way Vertical Machining Center SV-2414S-F SV-2414SE-F SV-2414SX-F
Work Capacity
Travel X,Y,Z 24" x 14" x 18.1" (610mm x 356mm x 460)
Spindle Nose to Table 3.1 - 20.94 (78.8mm-530mm)
Spindle Center to Column 16.9 (430mm)
Work Table
Table Area 28" x 13.8" (710mm x 350mm)
Spindle Taper CAT 40
Spindle Max. Speed 10,000 rpm
Driving Type Belt Drive
Motor (30m/cont.) 7.3/10 (5.5/7.5 kw)
Automatic Tool Changer (ATC)
Magazine type Carousel Carousel Side Mount
Magazine Capacity 10 10 [16] 24
Max. Tool Diameter 3.9" (120mm) 3.9" (120mm) [3.7 (93)] 3" (76.2)
w/o adj. tool, max dia. 9" (229mm) 9" (229mm) [3.7" (93mm)] 5" (127mm)
Max Tool Length 13.8" (350mm) 13.8" (350mm) 12" (304.8mm)
Max Tool Weight 13.2 lbs (6kg) 15.4 lbs (7kg) 15.4 lbs (7kg)
Air Blast at Tool Change Standard
Cutting Feed Rate 0.04 - 393.7 ipm (1-10,000 mm/m)
Rapid Traverse X/Y/Z: 590.6 ipm (15,000 mm/m)
Positioning Accuracy 0.00016/0.004 inch(mm)
Repeatability Accuracy 0.00012/0.003 inch(mm)
CNC Control Features
Controller Fanuc
Control Model Oi-mate-MD Oi-MD Oi-MD
Programming Assist Manual Guide
4th Axis Support Optional Standard Standard
Screen Size 8.4 LCD
Coolant System
Flood Coolant Nozzles 2
Coolant Tank Capacity 42 gal. (160 L)
Chip Pan Standard
Power Requirement
Electrical 220V/3 Phase/20 KVA/60 Hz
Air 6 CFM @ 88 psi
Machine Measurements
Floor Space W: 72.8" (1,850 M), w/ side mount 78.2" (2,000M) D: 85" (2,160 M)
Height 91.5" (2,325M)
Door Opening 25" (635M)
Weight 7,260 lbs (3,300)


  • Fanuc Oi-MD control and drives with ; USB port, 512K memory, Embedded Ethernet, RS-232C interface, 4 additional M codes, M30 Auto Power Off
  • Full metal enclosure with 2 large side doors
  • Coolant system with enlarged coolant tank
  • Coolant gun
  • Auto lubrication system
  • Rigid tapping
  •  Air gun
  • Removable electronic hand wheel (MPG)
  • Door interlock
  • Chip pan
  • Air accumulator
  •  Heat exchanger for electric cabinet
  •  Florescent work light


  • 4th axis kit prepped ( electrics, cables unit)
  • 4th axis with rotary table (complete with drives, motor)
  • Flat type chip conveyor
  • Oil skimmer
  • Coolant Through Spindle (CTS) prepped (rotary joint, hoses, cylinder electrics)
  • CTS 20 bar (300 psi) pump with tank
  • Tool Probe (Renishaw TS27R)
  • Tool Setter (Renishaw OMP40
  • Spindle oil chiller

Please contact our parts department at 310-370-5990.

Get a Quote

By submitting this form, you accept the Mollom privacy policy.

*Prices may vary based on location