• Summary
  • Features
  • Specs
  • Accessories
  • Parts
  • Brochure
  • Quote
Box Way Vertical Machining Centers
SV-5128ST

The Sharp SV-5128 ST and SV-5128 SX vertical machining center is engineered to have unsurpassed quality and outperform all other machines in its category. This is an extremely rigid “C” frame design using hardened and ground box ways. All our vertical machining centers structural components are made of Meehanite casting with internal ribs running throughout each section. Precision hand scraping of each section provides near perfect alignment assuring long term accuracies.  Spindle is a 25 hp, 10,000 rpm CAT 40 for the SV-5128 ST,and 12,000 rpm CAT 40 spindle for the SV-5128SX model. The new Fanuc 0i-MD control with color LCD is used along with all Fanuc motors and drives. For operator convenience, a remote jog handle is standard.

VERTICAL MACHINING CENTER - MODEL SV-5128ST

  • 51.2" x 27.5" x 28”   (1,300 x 700 x 710 mm ) travel, machine weight over 17,000 lbs  (8,000 Kg )
  • Induction hardened and ground box ways (X,Y,Z) for rigidity
  • Meehanite cast iron is used on all structural components. 
  • Finite Element Analysis (FEA) is used to optimize the structure for rigidity. 
  • A wide saddle fully supports the worktable throughout the travel. 
  • Fanuc Oi-MD control
  • Fanuc digital AC servo, motors and drives
  • CAT-40 taper spindle with 10,000rpm (ST), 12,000 rpm (SX) ,25 HP motor with chiller
  • Double anchored, pre-tensioned and double nut ball screws
  • 20 bars coolant through spindle prepped

Box Way Vertical Machining Center

SV-5128ST, SV-5128SX

 
Travel Size (X, Y, Z) 51.2" x 27.56" x 27.95" (1300 x 700 x 710 mm)
Table Size 59" x 25.6" (1500 x 650 mm)
Maximum Table Load 2200 lb. (1,000 Kg)
Table T-Slot Size 5" x 0.7" x 3.9" ( 5 x 18 x 100 mm )
Spindle Center to Column (throat) 28.7" ( 730 mm )
Spindle Nose to Table Surface 5.1" ~ 33" (130-840mm)
Floor To Table 33.5" (850 mm)
Spindle Speed (rpm) 5128 ST - 10,000 rpm, 5128 SX - 12,000 rpm
Spindle Taper CAT-40
Spindle Motor 20/25 HP (15/18.5 kw)
Cutting Feed Rate (all axes)(MAX) 393 ipm (10,000 mm/min)
Rapid Traverse (x,y) 945 ipm (24,000 mm/min)
Rapid Traverse (z) 590 ipm (15,000 mm/min)
Tool Capacity 24
Max. Tool Diameter 2.99" (76 mm)
Without Adjacent Tool 5.9" (150 mm)
Max. Tool Length 11.8" (300 mm)
Max. Tool Weight 15.4 lb. ( 7 Kg)
Tool Change Time, tool to tool 4.6 sec
Tool Change Time, chip to chip 6 sec
FANUC systems, standard Oi-MD
Positioning Accuracy +/- 0.0002" (+/- 0.005 mm)
Repeatability Accuracy +/- 0.0001" (+/- 0.003 mm)
General Power 220V/ 3 phase/ 60Hz
Air Requirement (psi) 6 CFM @ 88psi
Machine Dimensions 126" x 114" x 122", ( 2,900 x 2,900 x 3,100 mm)
Approximate Weight 17,600 Ib. (8.000 kg)
Approximate Weight 16,300 Lbs (7,400 Lg)

STANDARD ACCESSORIES:

  • Fanuc Oi-MD control with 10.4" color LCD Screen
  • Remote Jog Handle
  • Spindle Chiller
  • Separate Roll Out Coolant Tank
  • Flood Coolant
  • Large Side Doors
  • Electrical Cabinet Heat Exchanger
  • Automatic Lubrication System
  • Fluorescent Work light

OPTIONAL ACCESSORIES:

  • SV-5128 ST/SX Productivity Package (includes Chip Conveyor, Chip Coolant Flush System, Coolant Gun and 4 Spare M Codes) 
  • Fanuc CNC Update Option (2MB Part Program Storage, Data Server with Ethernet, 1GB Flash Memory) 
  • Coolant Through the Spindle Pump Option
  • Rotary Table Options, Tsudakoma 6" Indexer
  • Rotary Table Options, Nikken 7" Rotary Table Package
  • Rotary Table Options, Nikken 8" Rotary Table Package

Options are Factory Installed

Please contact our parts department at 310-370-5990.

Get a Quote

By submitting this form, you accept the Mollom privacy policy.

*Prices may vary based on location