• Summary
  • Features
  • Specs
  • Accessories
  • Parts
  • Brochure
  • Quote
Box Way Vertical Machining Centers
SV-6332SX

The Sharp SV-6332 SX of vertical machining center is engineered to have unsurpassed quality and outperform all other machines in its category. This is a extremely rigid “C” frame design using hardened and ground box ways. All structural components are made of Meehanite casting with internal ribs running throughout each section. Precision hand scraping of each section provides near perfect alignment assuring long term accuracies. 
Spindle is equipped with a 25 hp, 12,000 rpm CAT-40. Coolant through spindle is prepped for 20 bar. The new Fanuc 0i-MD control with color LCD is used along with all Fanuc motors and drives. For operator convenience, a remote jog handle is standard. 

VERTICAL MACHINING CENTER - MODEL SV-6332SX

  • 63” x 31.5” x 31.5” (1,600 x 800 x 800 mm) travel
  • Fanuc Control Oi MC Control 
  • Four Box Ways Design
  • 12,000 rpm Spindle, CAT-40 
  • 30 Automatic Tool Changer, Side Mounted
  • Fanuc Digital AC Servo Motors & Drives
  • Chip Drawer
  • 20 / 25 HP, (15 / 18.5 Kw) motor
Box Way Vertical Machining Center: SV-6332SX  
Travel Size (X, Y, Z) 63 x 31.5 x 31.5” (1600 x 800 x 800 mm)
Table Size 70.8 x 33” (1800 x 840 mm)
Table Load 4,840 lbs (2,200 kg)
T Slots (no, width, pitch) 5 x .86 x 5.9” ( 5 x 22 x 150 mm)
Throat Distance 34.2 “ (870 mm)
Spindle to Table 7.8 – 39.3” (200 – 1,000 mm)
Spindle Speed 12,000 rpm
Taper CAT 40
Transmission (direct) Belt
Spindle Motor 20 / 25 HP, (15 / 18.5 Kw)
Feed Rate ( X,Y ,Z ) 0.04 ~ 393.7 ipm (1-10,000 mm/min)
Rapid Traverse (X,Y) ,Z X/Y: 590 (15,000), Z: 472 (12,000)
Tool Change System 30 Tools, Side mount
Maximum Tool Diameter 3.0 (76)
Without adjacent tool 5.9” (150 mm)
Tool weight , Tool length 15.4 lb (7 kg), 11.8 “ (300 mm)
Tool change time 1.5 sec (tool to tool), 2.4 sec (chip to chip)
CNC Control Fanuc Oi-MD
Positioning Accuracy +/- 0.0002” (+/- 0.005 mm)
Repeatability Accuracy +/- 0.0001” (+/- 0.003 mm)
Electrical 220V/3 phase/60 Hz/35 KVA
Air Requirement (psi) 5 CFM @100 PSI
Machine Dimensions W:173”(4400mm) D: 135”(3428mm)
Height 130” (3310 mm)
Net weight 33,000 lbs (15,000 Kg)

STANDARD ACCESSORIES:

  • Manual Pulse Generator
  • Coolant System w/ Pump)
  • Semi-Enclosed Splash Guard
  • Automatic Lubrication System
  • Lubrication Failure Alarm
  • Halogen Work Light
  • Wired 220V, 3 phase, 60 Hz
  • Rigid Tapping
  • 24 ATC (side mounted)
  • Leveling bolts, pads and nuts

OPTIONAL ACCESSORIES:

  • Extra Pull Stud
  • Transformer, 20 KVA
  • Flash ATA Card-128, 256, 512 mb, and 1G
  • Indexer Pre-Wire Pkg
  • Flat Type Chip Conveyor
  • 4th Axis Pre-Wire Package, No AMP, No Motor
  • Coolant thru Spindle

Please contact our parts department at 310-370-5990.

Get a Quote

By submitting this form, you accept the Mollom privacy policy.

*Prices may vary based on location