• Summary
  • Features
  • Specs
  • Accessories
  • Parts
  • Brochure
  • Quote
Box Way Gear Head Vertical Machining Centers
SVG-6335A

Sharp's Box Way Gear Head Vertical Machining Center is an extremely rigid “C” frame design using hardened and ground Box ways. All structural components are made of Meehanite castings with internal ribs running throughout each section. The spindle is driven directly by the two speed gearbox, no drive belts are used.

For more visit our YouTube page and watch a demonstration of the SVG-6335A. (click here

BOX WAY GEAR HEAD VERTICAL MACHINING CENTER MODEL SVG-6335A

  • 63” x 34.6” x 27.6”  ( 1600 x 820 x 700 mm ) travel
  • 25 hp ( 18.5 kw ) Spindle Motor (SVG-6335)
  • 35 hp ( 26 kw ) Spindle Motor (SVG-6335A)
  • CAT 40 Spindle Taper (SVG-6335)
  • CAT 50 Spindle Taper (SVG-6335A)
  • 2 Speed Gearbox / 8,000 rpm
  • 4 hardened and ground box ways
  • Spindle Chiller, Orientation, load meter, and air blast
  • Prepped for coolant through the spindle
  • 40 Station Automatic Tool Changer
  • CNC Control with Fanuc 0i MD
  • CNC Control with 10.4 color LCD
  • Remote jog handle (MPG)

Box Way Gear Head Vertical Machining Center SVG-6335 SVG-6335A
Travel Size (X, Y , Z) 63” x 34.6” x 27.6” - (1600 x 820 x 700 mm) 63” x 34.6” x 27.6” - (1600 x 820 x 700 mm)
Table Size 71 x 37” (1800 x 935 mm) 71 x 37”(1800 x 935 mm)
Table Load 5500 lbs (2500 Kg) 5500 lbs (2500 Kg)
T Slots (No,Width,Pitch) 7,0.87”,4.9”(7,22mm,125mm) 0.87”,4.9”(7,22mm,125mm)
Spindle Nose to Table 7.87 - 35.4” (200-900 mm) 7.87 - 35.4” (200-900 mm)
Spindle Center to Column 34.4” (875 mm) 34.4” ( 875 mm)
Spindle Speed 30 - 8,000 rpm 30 - 8,000 rpm
Spindle Taper CAT 40 CAT 50
Transmission (Direct) 2 Speed Gear 2 Speed Gear
Spindle Motor cont./30mins ) 20/25 HP (15/18.5 Kw) 30/35 HP ( 22/26 Kw)
Rapid Traverse (X,Y) 787 ipm ( 20 M/min ) 787 ipm (20 M/min )
Rapid Traverse (Z) 590 ipm (15 M/min ) 590 ipm ( 15 M/min )
Tool Change System, Capacity 40 tools 40 tools
Tool change time (tool to tool) 4 sec 4 sec
Tool change time (chip to chip) 7 sec 7 sec
Max Tool Diameter 2.95” (75 mm) 4.92” ( 125 mm )
Max Tool Weight 15.4 lbs ( 7 Kg ) 33 lbs ( 15 Kg )
Max Tool Length 11.8” ( 300 mm) 11.8” ( 300 mm )
CNC Control Fanuc 0i MD Fanuc 0i MD
Positioning Accuracy ±.0002” ( +/- 0.005 mm) ±.0002” ( +/- 0.005 mm)
Repeatability Accuracy ±.0002” ( +/- 0.005 mm) ±.0002” ( +/- 0.005 mm)
General Power 220V / 3 phase / 60 Hz 220V / 3 phase / 60 Hz
Air Requirement 5 CFM@100 psi 5 CFM@100 psi
Dimensions and Weight    
Machine Dimensions 242" x 186" x 129" - ( 5.3 M x 3.3 M x 3.2 M ) 242” x 186” x 129” - ( 5.3 M x 3.3 M x 3.2 M )
Net weight 34,200 lbs. (15,500 Kg) 34,200 lbs. (15,500 Kg)


STANDARD ACCESSORIES:

  • Auto-lubrication system with alarm
  • Rigid tapping
  • Coolant gun
  • Halogen work light
  • Alarm light (3 tier)
  • Heat exchanger for electric cabinet
  • Hinged belt chip conveyor (42" discharge height)
  • 92 gallon roll out coolant tank
  • Flood coolant system
  • Tramp oil skimmer

Please contact our parts department at 310-370-5990.

Get a Quote

By submitting this form, you accept the Mollom privacy policy.

*Prices may vary based on location