• Summary
  • Features
  • Specs
  • Accessories
  • Parts
  • Brochure
  • Quote
Linear Way Vertical Machining Centers
SVL-3320SX-M

SHARP Industries is offering a new model of Linear Guide Vertical Machining Center with 33” x 20” x 22” travel. It will has a rapid traverse of up to 1,417 inches per minute, which provides users with quick positioning of the work table. The spindle speed for the SX model is 12,000 rpm. The model uses a Siemens 828-260 control system.

VERTICAL MACHINING CENTER MODEL SVL-3320SX-M

  • Linear Guideway construction
  • 12,000 spindle
  • 15 HP, Cat 40 spindle
  • ATC 30 Tool Side Mount
  • Rapid traverse of 1,417 ipm
  • Position accuracy 0.0002" +/- inch (0.005 mm)
  • Repeatability 0.00012" +/- inch (0.003 mm)
Linear Way Vertical Machining Center SVL-3320S-M SVL-3320SE-M SVL-3320SX-M
Work Capacity
Travel X,Y,Z 33.5" x 20.1" x 22" (850mm x 510mm x 560)
Spindle Nose to Table 5.9 - 27.9" (150mm-710mm)
Spindle Center to Column 24" (608mm)
Work Table
Table Area 39.4" x 19.7" (1000mm x 500mm)
Maximum Workpiece Weight 1,100 lbs (500 Kg)
Spindle
Spindle Taper CAT 40
Spindle Max. Speed 8,000 rpm 10,000 rpm 12,000 rpm
Driving Type Belt Drive
Spindle Motor 12.1/14.7 (9/11)
Rapid Traverse X/Y axis 1,417 ipm (36,000 mm/min)
Rapid Traverse Z axis 1,417 ipm (36,000 mm/min)
Cutting Feed Rate 0.04~1,417 (1~36,000)
Automatic Tool Changer (ATC)
Magazine type Carousel 20T Side Arm 24T Side Arm 30T
Tool Selection Type Set Tool Number Random Random
Max. Tool Diameter 3.9" (100mm) 3.1" (80mm) 3.1" (80mm)
w/o adj. tool, max dia. 5.9" (150mm) 4.9" (125mm) 4.9" (125mm)
Max Tool Length 9.8" (250mm) 11.8" (300mm) 11.8" (300mm)
Max Tool Weight 15.4 lbs (7kg)
Accuracy
Positioning Accuracy 0.0002/0.005 inch
Repeatability Accuracy 0.00012/0.003 inch(mm)
Coolant System
Flood Coolant Nozzles 6
Coolant Tank Capacity 63 gal. (240 L)
Chip Pan Standard
Machine Size
Floor Space (w/o Chip Conveyor) 109.4 x 84.6 (2780 x 2150)
Height 101.2" (2570)
Weight 11,000 lbs (5,000 kg) 11,440 lbs (5,200 kg) 11,880 lbs (5,400 kg)
Power Requirement
Electrical 220V /3 Phase/20 KVA/60 Hz
Air 6 CFM @ 88 psi

Standard Accessories

  • Siemens 828D Control, 10.4 LCD Screen
  • Cycle 832 (AICC) (100-block look-ahead)
  • Advanced Surface (Nano Smoothing)
  • 4 Axes Simultaneously
  • 3M Memory
  • USB Port
  • CF Card
  • RS-232C Interface
  • Embedded Ethernet
  • Shop Mill/ Shop Turn
  • Rigid Tapping
  • Coolant Gun
  • Air Gun
  • Fluorescent work light
  • Leveling Bolts and Pads
  • Fully enclosed splash guard
  • Adjusting Tool with Tool Box
  • Alarm Light
  • Electric Cabinet Heat Exchanger
  • 4 Additional M Codes
  • 3 Axes Telescopic Covers
  • Removable hand wheel M.P.G.
  • Door Interlock
  • M30 Auto Power OFf
  • Air Accumulator
  • Spindle around Cutting Coolant

Optional Accessories

  • Network drive
  • 4/5 Axis kit prepare
  • CTS 70 bar (1,000 psi) kit prepare
  • Spindle Oil Chiller
  • Hinge/Flat Type Chip Conveyor

Please contact our parts department at 310-370-5990.

Get a Quote

By submitting this form, you accept the Mollom privacy policy.

*Prices may vary based on location