STB-44

Swing 44 in.
Centers 60 – 236 in.
Bore 6, 9, 10, 12 & 15 in.
Bed Width 32 in.

Overview

The big bore spindle lathe offers spindle bores of 6”, 9”, 10″, 12”, and 15” diameter for different sizes of materials. The center distance range from 60 – 236″. The machine bed is 32” wide. Double chucks are available for holding extra long and large pipes.

  • Swing over bedways: 40″
  • Bet centers: 59″, 78″, 118″, 157″, 196″, 236″
  • Spindle bore: 6″ standard, 9″, 10″, 12″, 15″
  • Spindle motor: 30 hp, (40 & 50 hp, optional)
  • Bed width: 32″
  • Massive one- piece casting machine bedway/base
  • M code 4 step auto change speeds
  • 2 V ways and 2 flat ways machine bed design

Features

Three Points Support Headstock Spindle

The headstock casting is designed with one ball bearing and two tapered roller bearings supporting the full length of the spindle shaft.

Spindle bore sizes are available in 6”, 9”’ 10″, 12” , and 15”. Double chucks are available as options.

Gears and shafts are made from hardened and ground alloy steel, the spindle is made from forged, chrome alloy material.

One Piece Casting Bed/Base

The oversized 24” wide bedways are induction hardened and ground for long lasting accuracy.

One piece casting bedways and base offer rigidity and stiffness to the entire machine to enhance heavy cutting

Double Chuck Capability

The headstock is available with rear chuck adapter that allows double chucks to be mounted onto the headstock for holding extra long or heavy work pieces.

Machine Designed for High Productivity

The machine is built with 2 V and 2 flat bed ways with an extra way in front to add support to carriage travel. FANUC Oi-TF control and drive are used for its high reliability and excellent service. 4 gear change spindle speeds are provided for heavy cutting requirements.

Powered Tailstock and quill

The standard tailstock is equipped with a motorized quill feed for ease of infeed. Large hand crank allows convenient positioning of quill position. For larger models, motorized  tailstock units are available as standard. (picture shows power driven tailstock with motorized quill unit)

Specs 

DimensionsSTB-4460STB-4480 STB-44120STB-44160STB-44200STB-44240
Maximum Swing Over Bed

44.09 in.

(1120 mm)

44.09 in.

(1120 mm)

44.09 in.

(1120 mm)

44.09 in.

(1120 mm)

44.09 in.

(1120 mm)

44.09 in.

(1120 mm)

Swing Over Cross Slide

27.56 in.

(700 mm)

27.56 in.

(700 mm)

27.56 in.

(700 mm)

27.56 in.

(700 mm)

27.56 in.

(700 mm)

27.56 in.

(700 mm)

Distance Between Centers

59.06 in.

(1,500 mm)

78.74 in.

(2,000 mm)

118.11 in.

(3,000 mm)

157.48 in.

(4,000 mm)

196.85 in.

(5,000 mm)

236.22 in.

(6,000 mm)

Spindle Bore

6 in. (152 mm)

9 in. (230 mm)

10 in (255 mm)

12 in. (305 mm)

15 in. (380 mm)

6 in. (152 mm)

9 in. (230 mm)

10 in (255 mm)

12 in. (305 mm)

15 in. (380 mm)

6 in. (152 mm)

9 in. (230 mm)

10 in (255 mm)

12 in. (305 mm)

15 in. (380 mm)

6 in. (152 mm)

9 in. (230 mm)

10 in (255 mm)

12 in. (305 mm)

15 in. (380 mm)

6 in. (152 mm)

9 in. (230 mm)

10 in (255 mm)

12 in. (305 mm)

15 in. (380 mm)

6 in. (152 mm)

9 in. (230 mm)

10 in (255 mm)

12 in. (305 mm)

15 in. (380 mm)

Main Motor

30 hp (Std.)

40 hp & 50 hp (Opt.)

30 hp (Std.)

40 hp & 50 hp (Opt.)

30 hp (Std.)

40 hp & 50 hp (Opt.)

30 hp (Std.)

40 hp & 50 hp (Opt.)

30 hp (Std.)

40 hp & 50 hp (Opt.)

30 hp (Std.)

40 hp & 50 hp (Opt.)

CNC Control

FANUC Oi-TF

FANUC Oi-TF

FANUC Oi-TF

FANUC Oi-TF

FANUC Oi-TF

FANUC Oi-TF

BedSTB-4460STB-4480STB-44120STB-44160STB-44200STB-44240
Bed Way Construction2 V, 2 Flat Ways2 V, 2 Flat Ways2 V, 2 Flat Ways2 V, 2 Flat Ways2 V, 2 Flat Ways2 V, 2 Flat Ways
Width of Bed

31.89 in.

(810 mm)

31.89 in.

(810 mm)

31.89 in.

(810 mm)

31.89 in.

(810 mm)

31.89 in.

(810 mm)

31.89 in.

(810 mm)

Length of Bed

155.91 in.

(3960 mm)

175.59 in.

(4460 mm)

214.96 in.

(5460 mm)

254.33 in.

(6460 mm)

293.70 in.

(7460 mm)

333.07 in.

(8460 mm)

TravelSTB-4460STB-4480STB-44120STB-44160STB-44200STB-44240
X-Axis Travel
(Varies by different turrets installed)

23.62 in.

(600 mm)

23.62 in.

(600 mm)

23.62 in.

(600 mm)

23.62 in.

(600 mm)

23.62 in.

(600 mm)

23.62 in.

(600 mm)

Z-Axis Travel

45.28 in.

(1150 mm)

64.96 in.

(1650 mm)

104.33 in.

(2650 mm)

143.70 in.

(3650 mm)

183.07 in.

(4650 mm)

222.44 in.

(5650 mm)

X-Axis Ball Screw Diameter1.57 in.
(40 mm)
1.57 in.
(40 mm)
1.57 in.
(40 mm)
1.57 in.
(40 mm)
1.57 in.
(40 mm)
1.57 in.
(40 mm)
Z-Axis Ball Screw Diameter2.48 in.
(63 mm)
2.48 in.
(63 mm)
2.48 in.
(63 mm)
2.48 in.
(63 mm)
2.48 in.
(63 mm)
2.48 in.
(63 mm)
MotorSTB-4460STB-4480STB-44120STB-44160STB-44200STB-44240
Spindle Motor

30 hp (STD Fanuc Alpha 22)

Opt: 40 hp or 50 hp

30 hp (STD Fanuc Alpha 22)

Opt: 40 hp or 50 hp

30 hp (STD Fanuc Alpha 22)

Opt: 40 hp or 50 hp

30 hp (STD Fanuc Alpha 22)

Opt: 40 hp or 50 hp

30 hp (STD Fanuc Alpha 22)

Opt: 40 hp or 50 hp

30 hp (STD Fanuc Alpha 22)

Opt: 40 hp or 50 hp

X-Axis Servo Motor

5.3 hp

(Fanuc AC servo)

5.3 hp

(Fanuc AC servo)

5.3 hp

(Fanuc AC servo)

5.3 hp

(Fanuc AC servo)

5.3 hp

(Fanuc AC servo)

5.3 hp

(Fanuc AC servo)

Z-Axis Servo Motor

5.3 hp

(Fanuc AC servo)

5.3 hp

(Fanuc AC servo))

5.3 hp

(Fanuc AC servo)

9.3 hp

(Fanuc AC servo)

9.3 hp

(Fanuc AC servo)

9.3 hp

(Fanuc AC servo)

Hydraulic Pump2 hp
(1.5 kw)
2 hp
(1.5 kw)
2 hp
(1.5 kw)
2 hp
(1.5 kw)
2 hp
(1.5 kw)
2 hp
(1.5 kw)
Coolant Pump1.7 hp
(1.27 Kw)
1.7 hp
(1.27 Kw)
1.7 hp
(1.27 Kw)
1.7 hp
(1.27 Kw)
1.7 hp
(1.27 Kw)
1.7 hp
(1.27 Kw)
Machine WeightSTB-4460STB-4480STB-44120STB-44160STB-44200STB-44240
Weight

30,800 lbs.

(14,000 kg)

32,200 lbs.

(14,600 kg)

34,800 lbs.

(15,800 kg)

37,400 lbs.

(17,000 kg)

40,100 lbs.

(18,200 kg)

42,700 lbs.

(19,400 kg)

DimensionsSTB-4460STB-4480STB-44120STB-44160STB-44200STB-44240
Length
(Length with Chip Conveyor)

229.0 in.

(5,816 mm)

248.7 in.

(6,316 mm)

288.0 in.

(7,316 mm)

327.4 in.

(8,316 mm)

366.8 in.

(9,316 mm)

406.1 in.

(10,316 mm)

Width

122.0 in.

(3,100 mm)

122.0 in.

(3,100 mm)

122.0 in.

(3,100 mm)

122.0 in.

(3,100 mm)

122.0 in.

(3,100 mm)

122.0 in.

(3,100 mm)

Height

89.4 in.

(2,270 mm)

89.4 in.

(2,270 mm)

89.4 in.

(2,270 mm)

89.4 in.

(2,270 mm)

89.4 in.

(2,270 mm)

89.4 in.

(2,270 mm)

All specifications subject to change without notice. Please call to verify.

Accessories

Standard Accessories

  • Controller: Fanuc Oi TF
  • Flat belt conveyor
  • Spindle 4-steps speed auto change
  • X/Z axes auto lubrication system
  • Coolant system
  • X/Z-axes with Turcite-B on slideways
  • X/Z-axes C3 ballscrew
  • Manual tailstock, MT 6
  • Steady rest 16”
  • Full enclosure splash guard
  • Heat exchanger
  • Electronic handwheel (MPG)
  • Tailstock interference protection
  • Work lamp

Optional Accessories

  • 4 jaw chuck, different sizes
  • 3 jaw chuck, different sizes
  • 3 jaw hydraulic chuck, different sizes
  • Face plate with 4 jaws, different sizes
  • Steady rest , over 16”, different sizes
  • Follow rests, different sizes
  • Boring attachment for bar dia. 120mm
  • Spindle chiller
  • Rear chuck Adapter
  • Hydraulic turret 4-way turret      
  • Hydraulic turret V-8 tools, includes boring toolholder 3 pcs, facing toolholder 1 pc and turret sleeve
  • Hydraulic turret V-12 tools, includes boring toolholder 3 pcs, facing toolholder 1 pc and turret sleeve
  • Tailstock with hydraulic quill
  • Tailstock base with hydraulic lock bolt

Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.

Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.

Register to keep up to date with our monthly newsletter containing the latest information and specials.

Scroll to Top